Image 1 of 1
The Evnex E2 Core is a smart EV charger designed for residential use, delivering reliable and efficient home charging at up to 7.4 kW on single-phase power. It adds approximately 50 km of range per hour, charging a typical EV battery fully in around 10 hours overnight. The charger is Wi-Fi-enabled, allowing users to control charging, set schedules, and monitor usage through the Evnex mobile app. It features built-in overload protection that automatically adjusts charging speed to prevent tripping circuits or overloading the home's electrical system, ensuring safe operation without manual intervention.
Solar-smart charging is fully integrated into the E2 Core. Users can charge using excess solar energy, grid power, or a combination of both, with intelligent scheduling to maximize savings by drawing power when it's cheapest or cleanest. The charger supports solar-only mode, grid-only mode, and automatic switching between energy sources based on availability and user preferences.
-
Operating Temperature: -25°C to +55°C
Weather Proofing: IP55 indoor/outdoor
Impact Resistance: IK08
Weight: 2.95kg (including 5m type 2 cable)
Dimension (H x W x D): 288 x 185 x 66 mm
Connectivity : Wi-Fi
Protocol: OCPP restricted - requires Evnex approval for third-party back-office platforms
Charger Control Method: Plug & Charge ; Mobile control app (including access to all residential charging features)
-
Compatible with home energy management setups
Solar smart charging included (not limited!)
Smart scheduling with solar modes
App-controlled solar/grid charging
Excess solar charging functionality
Can charge from solar-only, grid-only, or mixed
Dynamic energy optimization
Positioning
A practical, smart home charger
-
-
The key terms of the warranty for the EVNEX chargers are as follows
Under the Australian Consumer Law (ACL) and similar state and territory legislation, consumers have certain rights which cannot be excluded, including guarantees as to the acceptable quality and fitness for purpose of goods and services.A. Nothing in these Terms and Conditions shall be read or applied so as to exclude, restrict or modify or have the effect of excluding, restricting or modifying any condition, warranty, guarantee, right or remedy implied by law (including the ACL) and which by law cannot be excluded, restricted or modified.
B. The ACL sets out minimum standards for Devices sold by us. Where the ACL applies, you may be entitled to a repair, replacement or a refund in accordance with the ACL.
C. We do not accept returns or exchanges for Devices unless they are faulty or damaged. This means if you order a Device that is not suitable for your needs, or if you change your mind, we will only process returns or exchanges at our discretion. We may, at our discretion, charge a restocking fee of up to 15% of the sale price of the item. The freight cost of returning the item to us will be paid by you.
D. If pre-orders are made available for Devices the estimated time of arrival will be subject to change. If you place a pre-order you acknowledge that potential delays may occur.
E. Some of our electric vehicle charging Devices may have variable charging rates. These rates may be lower or higher at certain times of day depending on overall electricity consumption in the local area, or the wider grid. We reserve the right to restrict charging rates remotely by default, but you may choose to override restrictions for the current charging session by using the Apps or the Portal.
F. Devices may not, in any case, be disconnected from the Evnex cloud software or connected to any third party back-office or OCPP cloud software without Evnex’s written permission. In all cases, disconnection (break) fees will apply.
