Evnex E2 Flex-7.4 kW (Supply & Install)

from $1,650.00
Installation Type:

Please note that the price is only valid for the supply and installation of Evnex chargers in Sydney. For other locations, please contact us.

  • Charging Capacity: 7.4 kW (1 hour or charging delivers up to 50 km of range)

  • Outlet Port: Single

  • Colour: Charcoal

  • Input Supply: 1-Phase (32A)

  • Connector: Type 2 plug

  • Cable: Tethered cable (5 meter)

  • Compatibility: All EVs

  • Usage Billing: Not Applicable

  • Warranty: 4 years (for residential use); 3 years (for commercial use)

Note: The E2 Flex does not come with the Tesla charge port integration or the Tesla battery state of charge integration. For these features, please look at our E2 Plus model.

Please allow atleast 1 business day for us to process your order.

Please note that the price is only valid for the supply and installation of Evnex chargers in Sydney. For other locations, please contact us.

  • Charging Capacity: 7.4 kW (1 hour or charging delivers up to 50 km of range)

  • Outlet Port: Single

  • Colour: Charcoal

  • Input Supply: 1-Phase (32A)

  • Connector: Type 2 plug

  • Cable: Tethered cable (5 meter)

  • Compatibility: All EVs

  • Usage Billing: Not Applicable

  • Warranty: 4 years (for residential use); 3 years (for commercial use)

Note: The E2 Flex does not come with the Tesla charge port integration or the Tesla battery state of charge integration. For these features, please look at our E2 Plus model.

Please allow atleast 1 business day for us to process your order.

The E2 Flex is a smart EV charger designed for home use, offering a range of practical and cost-effective features. It supports smart charging, allowing users to schedule charging during off-peak hours to reduce electricity costs. The unit also includes built-in overload protection to ensure the safety of your home’s electrical system during operation. For households with solar, the charger can be upgraded to enable solar charging. In terms of performance, it delivers charging speeds up to four times faster than a standard wall plug, adding approximately 50 km of driving range per hour. Overall, the E2 Flex is well-suited for households looking to maximise energy efficiency while maintaining safe and reliable EV charging.

👉 Positioning: Entry-level smart residential EV charger focused on reliability, simplicity, and value


SPECIFICATION


  • Operating Temperature: -25°C to +55°C

  • Operating Humidity: Max. 95% RH, non-condensing

  • Weather Proofing: IP55 indoor/outdoor

  • Impact Resistance: IK08

  • Weight: 4.2kg (with 5m type 2 cable)

  • Dimension: 268 x 185 x 66 mm (H x W x D)

  • Connectivity : Wi-Fi

  • Charger Control Method: Plug & Charge ; Mobile control app (including access to all residential charging features)

The pack Includes:

  • Evnex E2 Flex smart EV charger (7.4kW)

  • 5m tethered charging cable

  • Mobile app (including access to charging features)

  • Home overload protection

  • Includes power sensor (CT)

Solar Compatibility

❌ No advanced solar logic (less control vs E2 Plus / X22)

👉 Positioning: Entry-level smart residential EV charger focused on reliability, simplicity, and value .

  • The key terms of the warranty for the EVNEX chargers are as follows

    Under the Australian Consumer Law (ACL) and similar state and territory legislation, consumers have certain rights which cannot be excluded, including guarantees as to the acceptable quality and fitness for purpose of goods and services.

    A. Nothing in these Terms and Conditions shall be read or applied so as to exclude, restrict or modify or have the effect of excluding, restricting or modifying any condition, warranty, guarantee, right or remedy implied by law (including the ACL) and which by law cannot be excluded, restricted or modified.

    B. The ACL sets out minimum standards for Devices sold by us. Where the ACL applies, you may be entitled to a repair, replacement or a refund in accordance with the ACL.

    C. We do not accept returns or exchanges for Devices unless they are faulty or damaged. This means if you order a Device that is not suitable for your needs, or if you change your mind, we will only process returns or exchanges at our discretion. We may, at our discretion, charge a restocking fee of up to 15% of the sale price of the item. The freight cost of returning the item to us will be paid by you.

    D. If pre-orders are made available for Devices the estimated time of arrival will be subject to change. If you place a pre-order you acknowledge that potential delays may occur.

    E. Some of our electric vehicle charging Devices may have variable charging rates. These rates may be lower or higher at certain times of day depending on overall electricity consumption in the local area, or the wider grid. We reserve the right to restrict charging rates remotely by default, but you may choose to override restrictions for the current charging session by using the Apps or the Portal.

    F. Devices may not, in any case, be disconnected from the Evnex cloud software or connected to any third party back-office or OCPP cloud software without Evnex’s written permission. In all cases, disconnection (break) fees will apply.